inductance (?) 20% test frequency (khz) dc resistance maximum (ohms) current rating maximum (amps) dash number* 3.50 2.80 2.50 2.00 1.80 1.40 1.30 1.20 1.10 1.00 0.94 0.82 0.78 0.70 0.68 0.56 0.50 0.41 0.39 0.37 0.35 0.32 0.29 0.22 0.08 0.10 0.12 0.15 0.17 0.18 0.20 0.30 0.35 0.40 0.45 0.50 0.70 0.75 0.85 1.20 1.45 1.60 1.70 1.80 2.10 2.20 3.00 3.30 100 100 100 100 100 100 100 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.2 2.4 3.5 4.7 6.8 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 physical parameters inches millimeters a 0.244 0.012 6.2 0.3 b 0.260 .012 6.6 0.3 c 0.118 max. 3.0 max. d 0.181 ref. only 4.60 ref. only e 0.059 0.007 1.5 0.2 f 0.050 0.007 1.27 0.2 g 0.015 ref. only 0.38 ref. only mechanical con?uration units designed for surface mounting; ferrite core and ferrite sleeve terminals are solderable more than 95% new solder coverage when subjected to soldering temperature operating temperature range ?5? to +125? application frequency range values 1.2? to 12? to 1.0 mhz min. values above 12? to 300 khz min. current rating at 25? ambient the maximum dc current that will cause a 40? maximum temperature rise and where the inductance will not decrease by more than 10% from its zero dc value packaging tape & reel (16mm): 13" reel, 1500 pieces max.; 7" reel not available series spd62 -122m -242m -352m -472m -682m -103m -123m -153m -183m -223m -273m -333m -393m -473m -563m -683m -823m -104m -124m -154m -184m -224m -274m -334m *complete part # must include series # plus the dash # for further surface ?ish information, refer to technical section of this catalog. spd62r spd62 shielded surface mount inductors series 4/2005 page 85 www . delevan . com e-mail: apisales@delevan . com 270 quaker rd., east aurora ny 14052 ? phone 716-652-3600 ? fax 716-652-4814 power inductors
|
